
A326 Cordless Diffuser
800 ft² · 120 ml
Diffusers · The Technology
The reference method for commercial scenting. No heat, no water, no residue. Neat fragrance oil, atomised into a dry micro-mist that carries evenly through a room or a building.
What it is
A small pump pressurises ambient air. The air passes over a precision nozzle drawing from an oil cartridge. The nozzle atomises the oil into a dry aromatic mist and releases it into the room.
The mist particles are between one and three microns across. At that size, fragrance suspends in air the way scent does in nature. It travels. It spreads. It fades cleanly.
Nothing else is added. No water, no propellant, no heat. The oil you buy is the oil the room receives — top notes, middle notes, and base notes in the order the perfumer intended.
Cold air diffusion is a nebulizing technology. It uses pressurised air to break neat, undiluted fragrance oil into microscopic particles measured in microns. The particles are so fine that they remain airborne. No droplets. No wet surfaces.

How it differs
Every fragrance delivery method changes the oil before it reaches the nose. Some burn it. Some dilute it. Cold air diffusion leaves it alone.

Fragrance evaporates from a surface or burns off a wick. Range is short. Output falls as the source depletes. Top notes fade first, leaving a heavier, muddier scent. Not viable for spaces larger than one small room.
Fragrance is diluted into water then broken into wet mist by ultrasonic vibration. The output is damp. Droplets fall onto floors, fabrics, and glass. Fragrance is masked by the water carrier. Bacteria can grow inside the tank between fills.
Neat oil is atomised by pressurised air into a dry micro mist. Range extends across large volumes. Output is stable, tunable, and clean. Nothing touches surfaces. The fragrance the perfumer bottled is the fragrance the room receives.
The Range
Every unit runs the same cold-air atomisation — neat oil, no heat, no water. They differ in coverage, capacity, and how they mount.

800 ft² · 120 ml

1,000 ft² · 400 ml

2,000 ft² · 480 ml

2,000 ft² · 850 ml

8,000 ft² · 1,000 ml

15,000 ft² · 2.5L & 5.0L
Why it is superior
Cold air diffusion is the method specified by luxury hotels, flagship retail, and premium offices worldwide. The reasons are functional, not aesthetic.
Zero dilution. Zero heat. The oil enters the air chemically intact, which means top, middle, and base notes present in the correct order.
Micron sized particles stay airborne and drift with room currents. Coverage runs from eight hundred square feet to fifteen thousand square feet from a single system.
No water means no droplets. No droplets means no damp floors, no fogged glass, no ring stains on wood, no bacterial growth inside a tank.
Intensity, schedule, and zones are set from an app. The system dials up for busy periods, dials down at night, and shuts off entirely on holidays.
“The fragrance a guest smells on arrival should be the fragrance the perfumer signed off on. Cold air diffusion is the only method that keeps that promise across a whole building.”
How it deploys
The atomising engine is identical. What changes is where the mist enters your space. A standalone unit works inside the room. An HVAC integrated unit works inside the duct.

A finished floor, wall, or desk unit that runs off a wall socket. The mist releases directly into the space and travels on natural air movement.
The atomiser sits next to the air handling unit and injects mist into the supply air. The building's own ventilation carries fragrance to every register at the same intensity.

Deployment
Standalone or HVAC, the sequence is the same. One agreement covers hardware, oil, install, and monthly service.
We walk your site, measure air volume, and identify entry points. Standalone placement or HVAC tap decided on the spot.
Cubic feet, ceiling height, air exchange rate, and occupancy inform the unit selection and the oil consumption rate.
Our engineers commission the unit, dose the cartridge, and calibrate intensity against the space. No downtime for you.
Schedules by day and hour set from the app. Two week review to fine tune intensity based on guest and staff feedback.
Refills and preventive service monthly, pan India. IoT diagnostics flag issues before they show up in the room.
Questions
Diffusers · Airosyn
Aroma diffusers are engineered hardware for ambient scenting in commercial and residential spaces. The category covers HVAC-integrated systems for buildings, cold-air units for zoned floors, and waterless compact units for rooms. Airosyn manufactures and services all three categories from India.
Cold-air diffusion is the standard for Indian commercial scenting between 500 and 5,000 sqft. The technology atomises fragrance without heat or water, holds nano-droplets in suspension, and distributes evenly across the served zone. Wall-mount or in-cabinet install.
HVAC integration suits buildings above 5,000 sqft with central air. Diffusion is invisible, even, and centrally controlled. The A316 series integrates with existing AHU returns in most cases — no new ducting needed unless zoning the building separately.
All Airosyn hardware is manufactured in India for predictable lead times. Fragrance is IFRA-compliant and shipped with MSDS. AMC contracts cover refills, hardware servicing, and quarterly audits. GST-invoiced under Airosyn Perfusia Private Limited.
Keep exploring